Siemens NX postprocessors
Editing, building and adapting postprocessors to machines, controls and company standards.
Siemens NX CAM • postprocessors • automation
Postprocessors and CAM workflows adapted to real shop-floor work.
NCTune.com helps adapt Siemens NX to real production work: from editing and building postprocessors, through macros and automation, to training and machining technology support.
NX_CAM_POST
STATUS: READY
POSTPROCESSOR_TUNE()
MACRO_AUTOMATION()
TECHNOLOGY_SUPPORT()
Scope of work
Practical support for CNC programmers and manufacturing engineers.
Macros and automation
Tools that speed up repetitive Siemens NX tasks and streamline NC program preparation.
Siemens NX training
Training matched to the team's level: from structured fundamentals to specific production cases.
Technology consulting
Support in choosing strategies, settings and workflows so CAM remains stable, readable and predictable.
About Me
I connect Siemens NX CAM, postprocessors and real production practice.
I support manufacturing companies, technologists and CNC programmers when standard CAM configuration is no longer enough. My work focuses on postprocessors, macros and Siemens NX automation, where system knowledge has to meet the practical reality of the machine.
The goal is to reduce manual edits, organize the process and let the technologist focus on machining instead of repetitive clicking or correcting NC code after postprocessing.
Typical Problems
Areas where I most often help.
Manual NC code edits
Postprocessor analysis and modification so generated code is closer to the company standard and needs fewer edits after postprocessing.
Siemens NX automation
Macros and tools for repetitive tasks: filling data, organizing operations, generating documentation or preparing NC programs.
Technology department standards
Unifying descriptions, comments, headers, program structures and working rules so the team uses Siemens NX CAM consistently.
Macro and Application Examples
Implementations that remove repetitive work from technologists.
Implementation for GMSystem
Technology sheet as an additional GMS application
One automation example is an application supporting technology sheet creation. This kind of documentation gives the production operator clear guidance: which tools to use, how to fixture the part, which operations to perform and how the overall manufacturing process should run. The application helps collect that information in a consistent form so the sheet becomes practical support at the machine, not just another document to fill in.
See the installation and usage guide in the GMSystem help centerHow I work
Diagnosis first, then a precise change.
1
Analysis of the machine, control, current postprocessor and sample programs.
2
Defining the NC output standard: headers, cycles, comments, formats and axis behavior.
3
Implementation, tests on real cases and clear handover rules for daily use.
Goal
Fewer manual edits. More confidence in generated NC code.
Good automation does not obscure the process. It removes repetitive work, reduces errors and keeps the technologist in control of what reaches the machine.
Contact
Do you need to fix a postprocessor or organize an NX workflow?
nx [at] nctune.com
+48 507 957 187
Write which Siemens NX version you use, what control you work with and what currently needs improvement. The more specifics at the start, the faster the scope can be assessed.